|
| ||||||
|
|
|
|
|
You find the entire accessory offer for your BMW´s in the WUEDO Shop (in German language only, sorry)
set jump-start connections
A set of jump-start connections for all 4 V Boxers, except the RT models. This already happened to every biker: The first tough on the starter button and the motorcycle only snarled. Not enough power on the battery. What´s to do now? Just taping the car. No problem, if the battery would be within reach.
Some clever customers already bought the Bike startset from WÜDO. A wonderful part, but where to place the socket, which is not looking very pretty even if it´s very usefull.
The new solution is coming up with some new models of 2004.
We deliver a komplete kit, ready to install with installation instructions, fitting for all 4 V Boxers except the RT models.
Then you will only need a jump-start wire and a car or motorcycle, which helps you.
R 1150 R handlebar risers
So you can ride more comfortable. You only have to dismantle the handlebar, put the caps on the standard fixing points, screw on the WÜDO risers, put on the handlebar again and fix it with the standard screws – that´s all. The kit will be delivered with all needed parts and an ABE, so that you don´t have to get it lisensed here in Germany. All wires and tubes will remain standard.
R 1150 R kit of rider footrest advancement 8 cm 378,45 EUR
White Power of
shocks and fork springs for all BMW
models!
New in the WUEDO
program!
White power shocks for R 850/1150
R
33 54 43 White Power front
shock
379,31 EUR
33 54 44 White Power rear
shock
standard 379,31 EUR
33 54 44 01 White Power rear shock
with
adjustable tension 551,72 EUR
33 54 44 02
White Power rear shock
with hydraulic
preload adjustment 543,10 EUR
33 54 44 03 White Power rear shock
with hydraulic preload and tension
adjust. 715,52 EUR
Please you indicate your
personal weight for the order. We arrange your shock completely individual, in
suspension and absorption. Usually delivered for the average weight
of 75 kg.
We also offer White Power shocks for the older
R-models.
18 12 29 32 Marving muffler Cfk 395,69 EUR
18 12 29 33 Marving muffler aluminum 343,97 EUR
Deep tone and a loss of 2.5 kg weight. Combined with a light optic and no loss of power. These are the advantages of a Marving muffler for your BMW. With ABE.
R 1150 R kit of additional headlights
A clear glass fog and a long range headlight headlight directly next to the standard headlight. Delivered with a special holders, a suitable set of cables with switch and relay. A TUEV conformal assembly will stop each discussion with TUEV or police in the germ. Is important for you - the appearance of a being a motorcycle remains. Assembling additional lights e.g. on the cylinder protection guard can cause unpleasant discussions.
Of course you can get this kit also with two long range headlights, but please consider, it´s only allowed to have two headlights of a kind. This would mean, you must cancel the high beam in the standard headlight durable.
The fog headlight is switched and can shine with parking light/headlight low beam. It expires as soon as the high beam is switched on. The long range headlight always shines together with the high beam.
Please order the holder for fog headlight switches separately.
holder for fog headlight switch 44,40 EUR
A holder for a BMW switch, embedded into a suitable holder and central installation on the handlebar fasteners. With place for a second, homogeneous switch for other intended purposes.
holder for fog headlight switch 17,24 EUR
A holder suitably for a BMW switch, the right handlebar armature of the R. With place for a second, homogeneous switch for other intended purposes.
82 10 98 40 R 1150 R model 1:10 black 42,24 EUR
82 10 98 41 R 1150 R model 1:10 red met 42,24 EUR
Now it not only stands in the garage but also on the desk or the showcase. Usable center and side stand, rotating wheels and functionable suspension. Detailed to the smallest little things
11-00-78-98 1137,07 EUR
Engine performance R 1150 R on
approx. 72kW/98PS increase
The engine conversion kit include following parts and/or
work:
1
cylinder sealing set 11-12-23-94, exhaust seals, 2 special cam
shafts, cylinders shortening to increase compression to 11,3:1,
dismantling of the cylinder heads and cleaning.
Balancing intakes to channels. Work on the valve seat rings with
Serdi structural steel, valve seat replacement. Balancing of the valve
spring preload, cylinder heads examination and installation.
Additionally costs
when assembling here in our shop:
11-00-07-98
394,83 EUR
Installation costs
for the removal and installation of the
pistons and cylinders, installation of the cam shafts,
adjsuting after test
run
Necessary spare
parts as well as additionally work will be charged
separately.
The possibility of a TUEV entry is at
present examined.
The installation of a double ignition
is (12-12-04-50) is recommended.
R 1150 R rider's seat high
This seat is designed for large riders, who love longer distances, but having problems with their too strongly bended knees. The seat is coverd with a skid-proof upholstery, which lets drivers with textile suits firmly sit also in the saddle.
Available only in exchange.
R 1150 R passanger comfort seat
Not only simply a seat, but a pleasant seat with a new contour. A support at the rar end, less wide in the front, anti-slip cover. All things, which makes a long travel more comfortable.
Only available in exchange.
R 1150 R passanger comfort seat special
Specially for riders of the low BMW driver's seat or the narrow WUEDO seat, who would like to have little support to the rear. Besides it prevents to let the passanger slip onto the rider while braking.
Only available in exchange.
R 1150 R rider's seat narrow
Unfortunately with R 1150 R a serious step backward was made. The seat level adjustment was void for the disappointment of a large part of R 1150 R prospective customers. But a low seat level is not everything. You will already noticed this fact, if you made your seat lower for yourself.
We have thereupon once more near looked. It´s not possoible to install a hight adjustment, but there is a lot of place to make it less wide. We could take off about 60 mm. Worlds for whom, who have to fight for each mm of seat level.
Of course it was nevertheless not just simple. We had to design new side covers.
In the pictures you see an original BMW seat above, below you will see the narrow WUEDO seat.
It´s covered, like all our seats with a smooth, with skid-proof cover without any seams. Because seams on a seat sometimes causes pressure points.
Scope of supply: Seat in the exchange against an original seat with perfect baseplate. Two new, adapted Gfk side covers, unpainted, but however paintable.
Painting is possible against surplus in standards colors when desired.
46 71 91
80 154,31 EUR
R 1150 R
SW protection bars
A protection from the front and from the side without
any loss of inclination liberty. That were our defaults to this
bar.
In
silver it looks great at your BMW. Three fixing points and a connection between both
halfs creates an outstanding stability.
The scope of supply includes all screws,
washers and installation instruction.
46 71
58 75 59,92 EUR
R 1150 R cover of the footrest holders in the
back
Who always rides solo and without cases don´t need footrests in the back.
Let the fastening spots open don´t look well. Small, fine covers, will look
better.
Milled from aluminum and anodized they are a
wonderful eyecatcher.
The
scope of supply includes all screws and disks as well as two
mirror-image manufactured milled pieces.
Ideal in connection with our grips for motorcycles without luggage holders (46 54 09 10).
R 1150 R grips
Important for R 1150 R riders without passanger seat, luggage holder and luggage bridge, who want to travel. To fix the luggage fast and surely. To use the center stand is easier. Inconspicuously and less remarkably than a set of luggage holders.
46 61 60
15 137,93 EUR
WUEDO front fender for R 850/1150 R
The original is a mistake. Ugly and
not fitting. For all customerrs who have the same opinion we now have alternatives.
First is this WUEDO fender front made from glass fiber strengthened
plastic. Paintable and graceful designed. Simply to exchange
against the series fender.
Also available
painted against surplus. If desired also available
two-colored.
46 61
87
04 120,60 EUR
ICP front fender from Cfk for R
850/1150 R
The second alternative is
this, very clearly designed fender front made from carbon fiber.
Simply to exchange against the original one.
46 61 87
05 85,78 EUR
ICP fender back from Cfk for R
850/1150 R
In addition to the fender
front part 46 61 87 04 is this fender back suitable. Also made
of carbon fiber and very clearly designed. It will be fastened at the
standard fixing points.
46 63
37 93 128,45 EUR
ICP oil cooler cover left, R 850/1150
R
46 63 37 94 128,45
EUR
ICP oil cooler cover right, R 850/1150
R
Friends of carbon fiber parts will now be
pleased. A further eyecatcher at your BMW are the oil cooler covers on the
left and on the right. You just have to replace the standard parts. That´s
all.